무전해 코발트 코팅된 금속계 SOFC분리판의 제조 및 특성 평가 (Synthesis and Characterization of the Co-electrolessly Deposited Metallic Interconnect for Solid Oxide Fuel Cell)

서지정보

· 발행기관 : 한국재료학회
· 수록지 정보 : 한국재료학회지 / 20권 / 7호 / 356 ~ 363페이지
· 저자명 : 한원규, 주정운, 황길호, 서현석, 신정철, 전재호, 강성군

초록

For this paper, we investigated the area specific resistance (ASR) of commercially available ferritic stainless steels with different chemical compositions for use as solid oxide fuel cells (SOFC) interconnect. After 430h of oxidation, the STS446M alloy demonstrated excellent oxidation resistance and low ASR, of approximately 40 mΩcm2, of the thermally grown oxide scale, compared to those of other stainless steels. The reason for the low ASR is that the contact resistance between the Pt paste and the oxide scale is reduced due to the plate-like shape of the Cr2O3(s). However, the acceptable ASR level is considered to be below 100 mΩcm2 after 40,000 h of use. To further improve the electrical conductivity of the thermally grown oxide on stainless steels, the Co layer was deposited on the stainless steel by means of an electroless deposition method; it was then thermally oxidized to obtain the Co3O4 layer, which is a highly conductive layer. With the increase of the Co coating thickness, the ASR value decreased. For Co deposited STS444 with 2 μm thickness, the measured ASR at 800oC after 300 h oxidation is around 10 mΩcm2, which is lower than that of the STS446M, which alloy has a lower ASR value than that of the non-coated STS. The reason for this improved high temperature conductivity seems to be that the Mn is efficiently diffused into the coating layer, which diffusion formed the highly conductive (Mn,Co)3O4 spinel phases and the thickness of the Cr2O3(S), which is the rate controlling layer of the electrical conductivity in the SOFC environment and is very thin.

영어초록

For this paper, we investigated the area specific resistance (ASR) of commercially available ferritic stainless steels with different chemical compositions for use as solid oxide fuel cells (SOFC) interconnect. After 430h of oxidation, the STS446M alloy demonstrated excellent oxidation resistance and low ASR, of approximately 40 mΩcm2, of the thermally grown oxide scale, compared to those of other stainless steels. The reason for the low ASR is that the contact resistance between the Pt paste and the oxide scale is reduced due to the plate-like shape of the Cr2O3(s). However, the acceptable ASR level is considered to be below 100 mΩcm2 after 40,000 h of use. To further improve the electrical conductivity of the thermally grown oxide on stainless steels, the Co layer was deposited on the stainless steel by means of an electroless deposition method; it was then thermally oxidized to obtain the Co3O4 layer, which is a highly conductive layer. With the increase of the Co coating thickness, the ASR value decreased. For Co deposited STS444 with 2 μm thickness, the measured ASR at 800oC after 300 h oxidation is around 10 mΩcm2, which is lower than that of the STS446M, which alloy has a lower ASR value than that of the non-coated STS. The reason for this improved high temperature conductivity seems to be that the Mn is efficiently diffused into the coating layer, which diffusion formed the highly conductive (Mn,Co)3O4 spinel phases and the thickness of the Cr2O3(S), which is the rate controlling layer of the electrical conductivity in the SOFC environment and is very thin.

참고자료

· 없음