한국 주심포식건축의 처마구조에 관한 연구

서지정보

ㆍ발행기관 : 한국건축역사학회 ㆍ수록지정보 : 건축역사연구 / 25권 / 3호
ㆍ저자명 : 양재영

목차

1. 서 론
1-1. 연구의 배경과 목적
1-2. 연구의 대상과 방법
1-3. 선행연구의 경향
1-4. 관련 용어의 정의
2. 처마구조 분류형에 대한 개괄
2-1. 주심중심형 처마구조
2-2. 외목중심변이형 처마구조
2-3. 외목중심형 처마구조
3. 처마구조의 구성요소에 대한 분석
3-1. 장연의 분석
3-2. 부연의 분석
3-3. 처마길이의 분석
4. 결 론
참고문헌

영어 초록

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows.
First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽).
Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

참고 자료

없음