* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 21권 / 3호
ㆍ저자명 : 박준희, 김진구, 이태형
ㆍ저자명 : 박준희, 김진구, 이태형
한국어 초록
최근 구조물의 국부적인 손상이 전체적인 붕괴로 이어지는 연쇄붕괴 현상에 관한 연구가 활발히 진행되고 있다. 연쇄붕괴에 관한 기존의 연구는 대부분 해석변수의 불확실성을 포함하지 않는 확정론적인 방법이므로, 해석결과에 대한 신뢰도를 알 수 없다. 본 논문에서는 재료의 항복강도, 활하중의 크기, 감쇠비, 탄성계수 등치 설계변수들이 기둥이 제거됨에 따라 발생하는 수직변위에 영향을 미치는 민감도를 분석하였다. 이를 위하여 몬테카를로 시뮬레이션, 일계이차법, 토네이도 다이어그램의 세 가지 해석기법을 적용하였다. 비선형정적 해석결과에 의하면 난수로 설정한 해석변수들 중에서 보의 항복강도가 수직변위의 변동폭이 가장 컸으며, 비선형동적해석의 경우 보의 항복강도와 감쇠비가 서로 유사한 변동폭을 가지는 것으로 나타났다.영어 초록
Recently a lot of researches have been conducted on the progressive collapse of structures which is the total collapse of structures initiated by localized damage. Most of the previous studies on the field of progressive collapse have followed deterministic approach without considering uncertainty involved in design variables, which results in unknown reliability of the analysis results. In this study the sensitivity analyses are carried out with design variables such as yield strength, live load, damping ratio, and elastic modulus on the vertical deflection of the joint from which a column is suddenly removed. The Monte Calro simulation, tornado diagram method, and the first order second moment method(FOSM) are applied for the sensitivity study. According to the nonlinear static analysis results, the vertical deflection is most affected by the variation of yield strength of beams. The nonlinear dynamic analyses show that the behaviour of model structures is highly sensitive to variation of the yield strength of beams and the structural damping ratio.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 베리오그램 모델 변화에 따른 정규 크리깅 보간법의 민감도분석10페이지
- 광섬유센서가 내장된 강연선을 이용한 교량의 장력 모니터링 방법8페이지
- 대형 시스템에서의 다단계 부분구조 기법을 이용한 시스템 축소기법에 관한 연구5페이지
- 크리깅 기반 차원감소법을 이용한 베이지안 신뢰도 해석6페이지
- 제진장치를 적용한 초고층 주거형 건축물의 횡변위 제어 성능 평가9페이지
- 강교 부재의 상세 설계정보 표현을 위한 IFC기반의 데이터 모델 확장11페이지
- 3D 객체 모델과 구조해석 프로그램의 인터페이스 설계6페이지
- 확장 B-스플라인 기저함수를 이용한 레벨셋 기반의 형상 최적설계7페이지
- 등기하 해석법을 이용한 형상 최적설계6페이지
- 과적차량 방지를 위한 유비쿼터스도로에 관한 연구8페이지